Forward CRA14

Forward CRA14


CRA14 Specifications:


Capacity: 14,000 lbs. (6350kg)

Max. Wheelbase: 182.5″ (4635mm)

Max. Two Wheel Alignment: 166 3/4″ (4235mm)

Max. Four Wheel Alignment: 157″ (3987.8mm)

Min. Four Wheel Alignment: 88″ (2235mm)

Rise: 80-3/4″(2000mm)

Length Overall: 20′ 10″ (6350mm)

Width Overall: 10′ 11-3/4″ (3346mm)

Inside Columns: 116 1/4″ (2953mm)

Between Front and Rear Columns: 195 1/4″ (4959mm)

Height of Columns: 7′ 6-1/2″ (2281mm)

Width of Runways: 20″ (508mm)

Height of Runways: 9″ (228mm)

Width Between Runways: 43″ (1092mm) or 46″ (1168mm)

Time of Full Rise: 72 seconds

Voltage Single Phase*: 208v-230v

Motor: 2HP

Minimum Bay Size: 15′ x 25′ (4572 x 7620mm)


*Optional 3-Phase available

** Spec varies with power unit location

Lifts available in blue and red

Specifications subject to change without notice or liability


CRA14 4-Post Alignment Lift Features:


The foundation of a Forward CRA14 14,000 lbs. capacity Forward four-post lift is the cable and pulley system under the runways. All hydraulics and mechanical lifting components are concealed in this area; tucked out of the way for a clean finish however easily accessible for inspection when needed. Forward Lift offers a durable powder coated hammer tone paint finish on its lifts. Our four-post lifts have a multi-position lock component which allows any four-post lift to be level at any lock position. Self chocking approach ramps and wheel chocks come standard with the CRA14.


Additional Features:


  • Heavy duty hydraulic cylinder
  • Internal airline standard
  • Single Point latch release system
  • One piece formed runway design incorporates rolling jack channels
  • Multiple position latch points in each structural leg
  • Rear wheel slip plates standard

Forward CRA14 Lift Brochure



Forward_CRA14_Automotive_Lift.jpeg
Slide 1 (current slide)