Forward I12 Pro

Forward I12 Pro

Forward Automotive Lifts


F10 Specifications:


Total Capacity: 12,000 lbs. (5443kg)

Rise: 75-3/4″ (1924mm)

Maximum Rise: 80-3/4″ (2051mm) w/ 5″ extension

Adjustable Overall Height Options: 166″ (4216mm) Standard Height (i12N300)

Overall Width: 140″ – 146″ (3556 – 3708mm)

Drive Through Clearance: 108-3/4″ (2762mm) or optional 102-3/4″ (2610mm)

Overhead Switch Height Options: 160-1/8″ (4067mm) Standard

Front Arm Reach (Min./Max.): 27-3/4″ min / 59″ max (705mm / 1460mm)

Rear Arm Reach (Min./Max.): 27-3/4″ min / 59″ max (705mm / 1460mm)

Lifting Pad Height Min: 4-3/4″ (121mm) with no extension

Lifting Pad Height Max: 9-3/4″ w/ 5″ extension (248mm)

Width Between Columns: 120-7/8″ (3070mm) Adjustable

Width Between Columns: 114-7/8″ (2918) Standard

Motor/Phase: 1ph* / 2HP / 50Hz 1ph* / 2HP / 60Hz

Voltage/Amps: 208/230, 15 amps; 208/230, 16 amps

Speed of Rise: 60 seconds


*3-phase available at additional cost

Lifts available in blue and red

Specifications subject to change without notice or liability


I12 Pro Two-Post Lift Features:


Forward’s I12PRO two-post lift is gold certified with a 12,000 pound capacity for raising most passenger cars, trucks and vans. With two heavy-duty push hydraulic cylinders designed to increase lift performance and minimize down-time. Cylinders are located in each column concealed within the carriage itself. Durable powder coat finish provides exceptional protection from the wears a shop will see over the years. Forward’s spring operated arm restraints are just one feature that keep these heavy duty lift arms constantly performing at their peak performance.


Additional Features:


  • 12,000 lbs. capacity for raising most passenger cars, trucks and vans
  • Hydraulic cylinders in each column
  • Full Stroke
  • Cylinder rod concealed inside carriage
  • 75-3/4″ Rise | 80-3/4″ (With 5″ adapter extensions)
  • 3 Stage arm design
  • Door Bumper Kits Standard
  • Overhead cable equalization
  • Single Point lock release
  • Large rubber-padded drop-in adapter with extra height extensions (1.75″, 3.5″ and 5″) are standard
  • Spring operated arm restraints, disengage at floor level
  • Padded overhead height limit switch bar
  • Durable powder coat finish

Forward I12 Pro Lift Brochure



Forward_I10_Automotive_Lift_Spot.jpeg
Forward_F10_Automotive_Lift.jpeg
Slide 1 (current slide)
Slide 2