Forward F12
F12 Specifications:
Capacity: 12,000 lbs. (5443kg)
Maximum Rise: 77-1/2″ (1968mm) With 5″ adapter extension
Adjustable Overall Height Options: 166″ (4216mm)
Standard Height (F12N300): 178″ (4521mm) Extended Max.
Height (F12N301): 154″ (3912mm) (F12N302)
143″ (3632mm) (F12N303)
Overall Width: 140″ or optional 146″ (3556 / 3708mm)
Drive Through Clearance: 102-3/4″ or optional
108-3/4″ (2609 / 2762mm)
Overhead Switch Height Options: 160-1/8″ (4067mm) Standard
172-1/8″ (4524mm) Extended
148-1/8″ (3762mm)
137-1/8″ (3483mm)
Front Arm Reach: (Min./Max.)35″/ 54″ (889 / 1372mm)
Adapter Height: 4-3/4″ (120) w/ no adapter extension
9-3/4″ (248mm) w/ 5″ adapter extension
Rear Arm Reach: (Min./Max.)35″/ 54″ (889 / 1372mm)Min./Max.
Width Inside Column: 120-7/8″ (3070mm) Adjustable
114-7/8″ (2918)
Standard Voltage/Amps: 208/230, 12 amps; 208/230, 16 amps
Motor/Phase: **1ph*/2HP/50Hz; 1ph*/2HP/60Hz
Ceiling Height Required: 168″ (4267mm)
*3-phase available at additional cost
Lifts available in blue and red
Specifications subject to change without notice or liability
F12 Two-Post Lift Features:
Forward’s F12 two-post lift is gold certified with a 12,000 pound capacity for raising most passenger cars, trucks, and vans. With two heavy-duty push hydraulic cylinders designed to increase lift performance and minimize down-time. Cylinders are located in each column concealed within the carriage itself. Durable powder coat finish provides exceptional protection from the wears a shop will see over the years. Forward’s spring operated arm restraints are just one feature that keep these heavy duty lift arms constantly performing at their peak performance.
Additional Features:
- 12,000 lbs. capacity for raising most passenger cars, trucks and vans
- Hydraulic cylinders in each column
- Full Stroke
- Cylinder rod concealed inside carriage
- 72-1/2″ Rise | 77-1/2″ Rise (With 5″ adapter extensions)
- 2 Stage Arm Design
- Overhead cable equalization
- Single Point lock release
- Large rubber-padded swivel adapter with extra height extensions (3.5″ and 5″) are standard
- Spring operated arm restraints, disengage at floor level
- 2-stage front and rear arms
- Durable powder coat finish
